Huawei H12-831_V1.0-ENU Latest Exam Papers | H12-831_V1.0-ENU Test Result
2025 Latest ExamsTorrent H12-831_V1.0-ENU PDF Dumps and H12-831_V1.0-ENU Exam Engine Free Share: https://drive.google.com/open?id=1OmJNrdZV_xa7_PHiJYFowDg1jqoKuzPI
Provided you get the certificate this time with our H12-831_V1.0-ENU practice materials, you may have striving and excellent friends and promising colleagues just like you. It is also as obvious magnifications of your major ability of profession, so H12-831_V1.0-ENU practice materials may bring underlying influences with positive effects. The promotion or acceptance will be easy. So it is quite rewarding investment. Propulsion occurs when using our H12-831_V1.0-ENU practice materials. They can even broaden amplitude of your horizon in this line. Of course, knowledge will accrue to you from our H12-831_V1.0-ENU practice materials.
Huawei H12-831_V1.0-ENU exam is a valuable credential for IT professionals who want to enhance their career growth and professional credibility. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification exam tests the knowledge and skills of IT professionals in advanced routing and switching technologies. IT professionals who wish to take H12-831_V1.0-ENU Exam must have a deep understanding of network architecture, network security, routing protocols, and switching technologies. H12-831_V1.0-ENU exam is designed to test the candidate's ability to design, implement, and maintain complex networks.
>> Huawei H12-831_V1.0-ENU Latest Exam Papers <<
Pass Guaranteed Newest Huawei - H12-831_V1.0-ENU Latest Exam Papers
Our H12-831_V1.0-ENU study materials are the accumulation of professional knowledge worthy practicing and remembering. There are so many specialists who join together and contribute to the success of our H12-831_V1.0-ENU guide quiz just for your needs. As well as responsible and patient staff who has being trained strictly before get down to business and interact with customers on our H12-831_V1.0-ENU Exam Questions. You can contact with our service, and they will give you the most professional guide.
Huawei H12-831_V1.0 (HCIP-Datacom-Advanced Routing & Switching Technology V1.0) Exam is a certification exam that tests candidates' knowledge and skills in advanced routing and switching technologies. It is designed for IT professionals who have experience in data communication and network technologies and want to enhance their expertise in advanced routing and switching techniques. H12-831_V1.0-ENU Exam covers a wide range of topics, including OSPF, BGP, MPLS, VPN, QoS, IPv6, and more. It requires candidates to have a deep understanding of network protocols and configurations, as well as the ability to troubleshoot complex network issues.
Huawei H12-831_V1.0 is a certification program that provides advanced-level knowledge and skills in routing, switching, and network troubleshooting. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification is intended to help networking professionals design, maintain, and configure advanced data communication systems. The HCIP-Datacom-Advanced Routing certification has gained popularity over the years, as it addresses the increasing need for skilled professionals who can design and manage highly complex enterprise networks.
Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Sample Questions (Q32-Q37):
NEW QUESTION # 32
On the OSPF network shown in the figure, a network engineer finds that R1 and R2 have the same router ID, and both have imported default routes (with the default-route-advertise always command configured). Given this, which of the following statements is false?
- A. R1 and R3 can establish a neighbor relationship.
- B. R1 and R2 can establish a neighbor relationship.
- C. A routing loop may occur between R3 and R4.
- D. R2 and R4 can establish a neighbor relationship.
Answer: B
NEW QUESTION # 33
Regarding the label space of MPLS, the description is wrong:
- A. 16~1023is staticLSPand staticCR-LSPshared tab space
- B. 1024Above areLDP,RSVP-TE. MP-BGPLabel space shared by other dynamic signaling protocols
- C. If the out tag value is0,The router will directly discard the packet
- D. penultimate jumpLSRWhen performing label exchange, if the exchanged label value is found to be3,By default, the label is popped and the message is sent to the last hop
Answer: C
NEW QUESTION # 34
The figure shows the output information on a switch.
Which of the following can be determined from the information?
- A. When the average rate of known unicast packets is 2500 pps, GE0/0/1 is shut down.
- B. After broadcast packets are blocked on GE0/0/1, broadcast packets are forwarded only when their average rate is lower than 1000 pps.
- C. When the average rate of unknown multicast packets is 1500 pps, GE0/0/1 blocks the multicast packets.
- D. The administrator configures traffic suppression on GE0/0/1 of the switch.
Answer: D
Explanation:
Comprehensive and Detailed In-Depth Explanation:
Understanding the Table and Traffic Suppression Configuration
Port Name
Type
Rate (Min/Max)
Mode
Action
Punish-Status
Trap
Log
Int
Last-Punish-Time
GE0/0/1
Broadcast
1000 / 2000
Pps
Block
Normal
Off
On
90
-
GE0/0/1
Multicast
1000 / 2000
Pps
Block
Normal
Off
On
90
-
GE0/0/1
Unicast
1000 / 2000
Pps
Block
Normal
Off
On
90
-
Key Observations from the Table:
* Traffic suppression (or rate limiting) is configured on interface GE0/0/1 for broadcast, multicast, and unicast traffic.
* Thresholds:
* Min rate: 1000 pps (packets per second)
* Max rate: 2000 pps
* If the traffic exceeds the configured threshold (2000 pps), the action is to "Block".
* The interface is still "Normal" (not shut down), meaning exceeding 2000 pps does not disable the port.
* Logging is enabled (Log: On), but trapping (Trap: Off) is disabled.
Analysis of Each Answer Choice
A: "When the average rate of unknown multicast packets is 1500 pps, GE0/0/1 blocks the multicast packets." # (False)
* The blocking threshold for multicast is 2000 pps (Max rate).
* If the rate is 1500 pps, it is still below the threshold, so traffic is not blocked yet.
# Statement A is incorrect.
B: "When the average rate of known unicast packets is 2500 pps, GE0/0/1 is shut down." # (False)
* The table does not indicate that exceeding the max threshold (2000 pps) shuts down the interface.
* Instead, it simply blocks packets exceeding the rate limit.
* The interface remains "Normal", meaning it is not shut down.
# Statement B is incorrect.
C: "After broadcast packets are blocked on GE0/0/1, broadcast packets are forwarded only when their average rate is lower than 1000 pps." # (False)
* The minimum rate is 1000 pps, but there is no indication that traffic resumes forwarding only when it drops below this rate.
* The configuration only states blocking when exceeding 2000 pps, but does not enforce a strict reactivation at 1000 pps.
# Statement C is incorrect.
D: "The administrator configures traffic suppression on GE0/0/1 of the switch." # (True - Correct Answer)
* The table explicitly shows that a traffic suppression policy is applied to broadcast, multicast, and unicast packets on GE0/0/1.
* This confirms that the administrator has configured traffic suppression (rate limiting) on this interface.
# Statement D is correct.
Final Conclusion:
# Correct answer: D. The administrator configures traffic suppression on GE0/0/1 of the switch.
NEW QUESTION # 35
Which of the following statements about the OSPFv3 message format is correct? (Multiple choice)
- A. Removed Authentication and Auth Type fields
- B. There is no change in the option field of the Hello message
- C. OSPF version number changed from 2 to 3
- D. Hello message no longer contains address information and Interface ID
Answer: A,C,D
NEW QUESTION # 36
When troubleshooting MSTP, you executed the display current-configuration command to obtain the configuration file of the device. Which of the following statements is wrong?
- A. Check the port configuration to confirm whether the MSTP-enabled port is enabled with the protocol message sending command. Such as: bpdu enable
- B. Whether the MSTP port connected to the user terminal device is disabled or configured as an edge port
- C. Check whether the port is added to the correct WLAN
- D. No matter whether the BPDU Tunnel is configured on the device or not, MSTP will not affect it correctly
Answer: D
NEW QUESTION # 37
......
H12-831_V1.0-ENU Test Result: https://www.examstorrent.com/H12-831_V1.0-ENU-exam-dumps-torrent.html
P.S. Free & New H12-831_V1.0-ENU dumps are available on Google Drive shared by ExamsTorrent: https://drive.google.com/open?id=1OmJNrdZV_xa7_PHiJYFowDg1jqoKuzPI
Intro price. Get Histudy for Big Sale -95.
